ONOSOKKIEngine speed sensorIP-3000AIP-3000A engine speed sensor is made of amorphous metal wire elements. Compared with our company's original products, the thickness is only 1/4 (about 1/150 of the original in terms of volume ratio) and the weight is 1/3 of the original. Therefore, it is thin and light, and has high sensitivity. It is suitable for various gasoline engines from low speed to high speed. Corresponding to the structure of the latest gasoline engine, it can be easily installed on the ignition coil (primary side of the ignition coil and current coil of the electronic distributor) which is difficult to install with the original product. In addition, it adopts a heat-resistant design, and the maximum operating temperature can reach +120℃, so it can be used in harsh high temperature environments. Applicable to 2-stroke and 4-stroke gasoline engines Sensor installation position The primary line of the ignition coil and the current line of the electronic distributor can be installed with a maximum wire diameter of Φ5 mm Output signal Pulse signal Signal cable Heat-resistant signal cable: about 4.9 m (sensor connection cable), with output terminal connector (BNC) Operating temperature range -40 to +120℃ Storage temperature range -50 to +120℃ Dimensions 8.0 (W) × 9.5 (H) ×30.0 (D) mm Weight 80 g (including signal line)